Technical Program

202: 3D/Additive and Inkjet-Printed Antennas

Session Type: Special Session Oral
Time: Tuesday, July 8, 08:00 - 11:40
Location: Cotton Row
Session Chairs: Gareth Conway, Queen's University Belfast and Dalia Elsheakh, Electronics Research Institute, Egypt
 
202.1: INKJET PRINTING OF A WIDEBAND, HIGH GAIN MM-WAVE VIVALDI ANTENNA ON A FLEXIBLE ORGANIC SUBSTRATE
         Bijan Tehrani; Georgia Institute of Technology, United States
         Benjamin Cook; Georgia Institute of Technology, United States
         James Cooper; Georgia Institute of Technology, United States
         Manos M. Tentzeris; Georgia Institute of Technology, United States
 
202.2: OPTIMIZED RF/MICROWAVE ANTENNAS AND CIRCUITS ON LOW-COST FIBROUS SUBSTRATES USING INKJET-PRINTING TECHNOLOGY
         Hossein Saghlatoon; Tampere University of Technology, Finland
         Lauri Sydänheimo; Tampere University of Technology, Finland
         Leena Ukkonen; Tampere University of Technology, Finland
         Manos M. Tentzeris; Georgia Institute of Technology, United States
 
202.3: ADVANCEMENT OF 3D PRINTED CONFORMAL FSS AND ACTIVE ARRAY
         Isaac Ehrenberg; Massachusetts Institute of Technology, United States
         Sanjay Sarma; Massachusetts Institute of Technology, United States
         Bae-Ian Wu; Air Force Research Laboratory, United States
 
202.4: AN INKJET-PRINTED FLEXIBLE BROADBAND MULTILAYER SIW COUPLER FOR ANTENNA ARRAY SYSTEMS
         Sangkil Kim; Georgia Institute of Technology, United States
         Herve Aubert; LAAS-CNRS, France
         Manos M. Tentzeris; Georgia Institute of Technology, United States
 
202.5: AN INKJET PRINTED NEAR ISOTROPIC 3-D ANTENNA WITH EMBEDDED ELECTRONICS FOR WIRELESS SENSOR APPLICATIONS
         Muhammad Fahad Farooqui; King Abdullah University of Science and Technology (KAUST), Saudi Arabia
         Atif Shamim; King Abdullah University of Science and Technology (KAUST), Saudi Arabia
 
202.6: WEARABLE INKJET-PRINTED ANTENNA PERFORMANCE FOR MEDICAL APPLICATIONS AT 868/915 MHZ
         Gareth Conway; Queen's University Belfast, United Kingdom
         William Scanlon; Queen's University Belfast, United Kingdom
 
202.7: FLEXIBLE PLASTIC-BASED INKJET PRINTED CPW FED DIPOLE ANTENNA FOR 60 GHZ ISM APPLICATIONS
         Khelifa Hettak; Communications Research Centre Canada, Canada
         Aldo Petosa; Communications Research Centre Canada, Canada
         Rob James; Communications Research Centre Canada, Canada
 
202.8: A FULLY INKJET-PRINTED 3D TRANSFORMER BALUN FOR CONFORMAL AND ROLLABLE MICROWAVE APPLICATIONS
         Chiara Mariotti; University of Perugia, Italy
         Luca Aluigi; Independent Researcher, Germany
         Trang T. Thai; Georgia Institute of Technology, United States
         Federico Alimenti; University of Perugia, Italy
         Luca Roselli; University of Perugia, Italy
         Manos M. Tentzeris; Georgia Institute of Technology, United States
 
202.9: INKJET-PRINTED UHF RFID FOLDED DIPOLE ANTENNAS FOR REMOTE SENSING APPLICATIONS
         John Kimionis; Georgia Institute of Technology, United States
         Manos M. Tentzeris; Georgia Institute of Technology, United States
         Symeon Nikolaou; Frederick University, Cyprus
 
202.10: TECHNOLOGY FOR FULLY PRINTABLE AND ROLLABLE GROUND PENETRATING RADAR (GPR) SYSTEMS
         Anya Traille; CNRS-LAAS, France
         Sangkil Kim; Georgia Institute of Technology, United States
         Antony Coustou; LAAS-CNRS, France
         Herve Aubert; LAAS-CNRS, France
         Manos M. Tentzeris; Georgia Institute of Technology, United States